HARBOR DECK & FENCE · LOCAL & OWNER-OPERATED

Fence Builder in Tacoma, WA

Cedar privacy fences, custom designs, chain link, hog wire, gates, and repairs. Harbor Deck & Fence brings more than 15 years of hands-on construction experience to fences built around your property and the way you use it.

Standard & custom fencing · Installation & replacement · Fence repair

Fence installation backed by hands-on experience

A good fence starts before the first post goes in. The layout, soil, grade changes, gate openings, and connections all need to work together. As a local fence company serving Tacoma and nearby communities, we help homeowners choose a practical standard fence or plan a custom design with the details they want.

Our experience shows in straight runs, planned transitions, supported gates, and a clean finish. We explain the material and design choices, then provide a written scope for the work. Learn more about Harbor Deck & Fence.

Featured Harbor project: Gig Harbor cedar privacy fence. Watch the 1-minute project video to see the contrasting posts, open top detail, trim, and post-cap lighting. Watch on YouTube.

Fence types and styles we build

Start with what the fence needs to do: provide privacy, define a boundary, create a pet area, frame a garden, or complement the home. Then compare the material, appearance, upkeep, and gate layout.

Standard cedar privacy fences

A straightforward cedar privacy fence uses close-set vertical boards supported by rails and posts. Two-rail and three-rail layouts are common starting points; the appropriate structure depends on the fence height, spans, and site. This is a practical choice for backyard privacy and a natural wood appearance.

Plan for: wood movement, finish care, ground clearance, and sound post support. Cedar can weather, check, or develop gaps as moisture levels change.

Trim-style, capped and board-on-board fences

Trim boards, exposed posts, a top cap, and a more finished panel layout add definition to a cedar fence. Our trim-style options can include rails on both sides for a balanced appearance. Overlapping board-on-board designs help maintain privacy as boards move.

Plan for: the look from both sides, trim proportions, drainage, and the added materials and labor compared with a basic fence.

Horizontal, picket and custom wood designs

Horizontal boards create a clean, modern layout. Picket, lattice-top, shadowbox, and split-rail styles serve different goals, from a welcoming front boundary to a more open garden fence. We can combine board patterns, caps, contrasting posts, and decorative tops to suit the property.

Plan for: board support, spacing, privacy from different angles, grade changes, and the level of upkeep you prefer.

Hog-wire and welded-wire fences

Wire panels in a wood frame keep a yard, garden, or view visually open. We build the posts, rails, panel connections, and matching gates as one assembly. The wire opening, coating, and finished height should fit the intended use.

Plan for: pet size, bottom gaps, climbing behavior, and maintenance of both the wire and wood. An open wire fence is different from a solid privacy fence.

Chain link fencing

Galvanized and color-coated chain link are practical choices for yards, pet areas, and property boundaries where visibility matters. Posts, top rails, fabric, tensioning, and gate hardware all contribute to a finished fence that works properly.

Plan for: mesh size, height, gate width, coating, and location restrictions. Tacoma has rules affecting some street-facing fence materials; we review the proposed location before recommending a layout.

Ornamental aluminum and steel fences

Metal picket fencing provides a defined boundary with an open appearance. Aluminum and coated steel systems have different profiles, finishes, and maintenance requirements. Matching walk gates or wider openings can be included when the selected system supports them.

Plan for: finish care, corrosion exposure, panel spacing, slopes, and compatible posts and hardware. We review the specific product instead of treating all metal fences alike.

Vinyl, PVC and composite fence systems

For a lower-upkeep alternative to wood, we can review vinyl/PVC and composite products for your layout. Styles range from traditional panels to wood-look privacy designs. Installation depends on the manufacturer’s post supports, reinforcement, spacing, and gate requirements.

Plan for: product availability, movement, panel sizes, and cleaning. These materials still need care; Trex’s composite fence care guide is one example of product-specific guidance.

3D wire mesh and customer-selected kits

Rigid welded-mesh panels, mixed wood-and-metal designs, and compatible fence kits offer additional options. If you have a product or inspiration photo in mind, bring it to the estimate so we can review the complete system and how it fits the property.

Plan for: sourcing, complete components, mounting details, fence purpose, and applicable requirements. We confirm suitability before promising to install a particular kit.

Our fence design gallery shows more styles and combinations. We can talk through standard construction and custom details without assuming the most elaborate option is the right fit for every yard.

See our standard and custom fence work

Capped cedar privacy fence with vertical boards on a sloped Harbor project
A cedar fence follows changing ground with a capped top and framed panels.
Hog-wire fence with wood framing, matching gate and post-cap lights
Open wire panels and a matching gate preserve visibility through the yard.
Harbor cedar privacy fence in Gig Harbor with contrasting posts and an open top section
Gig Harbor project: cedar privacy panels, contrasting posts, decorative top detail, and lighting.

Custom details with a purpose

In the featured Gig Harbor project, approximately six feet of cedar privacy fencing is topped by an approximately one-foot open lattice section. Walnut-toned 6-by-6 cedar posts, horizontal trim, and solar post-cap lights give the fence its finished appearance.

That is one custom design, not a standard height or specification for every property. We plan each fence around the site and the applicable requirements.

See more real Harbor work in our project gallery.

Fence repair and replacement in Tacoma

Leaning posts, broken boards, loose rails, storm damage, and a gate that drags can point to different problems. We inspect the visible condition and connections before recommending a repair.

  • Replace damaged boards, rails, or sections where the surrounding fence remains sound.
  • Review failing posts and their support rather than covering up rot or movement.
  • Repair or replace compatible gate frames, hinges, and latches.
  • Assess damaged chain link, wire panels, and connection hardware.
  • Remove and replace an aging fence when a larger rebuild is the practical option.

We explain which parts appear reusable and what may need attention after old materials are removed. A small repair and a complete replacement should have clearly different scopes.

Fence gates planned for everyday use

We build and install walk gates, wider yard-access gates, and suitable double-gate layouts to coordinate with the fence. Clear opening width, swing direction, slope, post support, hinges, and latches affect how well a gate works over time.

Tell us what needs to pass through: people, lawn equipment, bins, or a larger access opening. For pets, we also discuss the opening size and clearance under the gate. We review special hardware or an existing gate system before including it in the scope.

If the project also includes a deck or elevated edge, our deck railing installation and repair service covers those separate requirements.

The construction details that matter

Posts, rails and connections

A fence is only as dependable as the parts supporting it. We consider the post material, ground exposure, soil, fence height, wind exposure, span, and gate loads when planning the assembly. Fasteners and hardware need to suit the materials and exterior conditions.

Layout, slopes and finish

Changes in grade affect the top line, panel layout, gate swing, and gaps near the ground. We discuss stepped or sloped layouts as the design and product allow, then plan trim and transitions so the finished fence looks intentional.

Wood fences need ongoing care. Keep debris from trapping moisture at the bottom, inspect posts and hardware, and maintain finishes as appropriate. The Western Red Cedar Lumber Association’s cedar care and maintenance guide explains why upkeep depends on exposure and the chosen finish.

Planning a fence in Tacoma

Before installation, confirm the proposed fence line, access, height, gates, and site restrictions. An old fence or an online property map does not establish a legal boundary; uncertain lines may require a licensed surveyor.

Tacoma’s official fence planning and permit guidance covers building-permit exemptions, visibility near driveways and corners, rights-of-way, and other location restrictions. A permit exemption does not remove the other requirements. Nearby jurisdictions and HOA rules may differ.

Underground utilities also need attention before digging. Washington’s Call Before You Dig guidance explains the 811 utility-locate process. Private facilities may require separate locating; tell us about irrigation, outbuilding power, and other known underground services.

What affects fence installation cost?

Fence estimates depend on the measured length, height, material, style, posts, gates, demolition and disposal, slope, access, soil conditions, and any required approvals. Trim, overlapping boards, special hardware, and custom transitions add different materials and labor.

We provide a written project scope rather than a square-foot placeholder price. Compare what is included in each estimate, including removal, gate hardware, finish work, and cleanup.

How our fence projects work

  1. Discuss the project. Review your goals, photos, approximate length, and address.
  2. Assess the site. Measure the proposed layout and review access, grade, gates, and existing conditions.
  3. Choose the design. Compare materials, standard or custom details, and maintenance.
  4. Confirm the scope. Identify installation, removal, repairs, and planning needs in writing.
  5. Build and review. Complete the agreed work, clean the work area, and review the finished fence.

Fence builder and installation FAQs

We work with cedar privacy fences, standard and trim-style wood fencing, horizontal and custom wood designs, hog wire, chain link, ornamental metal, gates, and compatible fence systems or kits. We can also review vinyl/PVC, composite, and rigid wire-mesh options for the site and intended use.

A standard cedar fence usually uses a straightforward post, rail, and vertical-board layout. Custom work can add caps, trim on both sides, overlapping boards, horizontal patterns, lattice tops, contrasting posts, or a special gate layout. The structure and details are planned for the specific project.

Wood expands and shrinks as moisture levels change. Close-set boards may develop gaps as they dry. Overlapping board-on-board designs can help maintain privacy, but the layout, material condition, and desired appearance still need to be considered.

Yes, when the surrounding fence and its support remain suitable. We inspect the visible posts, rails, boards, panels, and gates before recommending a targeted repair. Widespread rot, repeated movement, or an incompatible old system may make replacement more practical.

Tacoma states that fences up to seven feet may be exempt from a building permit when the stated conditions are met. Location, sightlines, rights-of-way, material restrictions, and critical areas still matter. We review the proposed work against the relevant jurisdiction’s requirements rather than assuming height alone settles the question.

We can plan fencing for changing grades. Depending on the style and product, the design may follow the slope or use stepped panels. We discuss the top line, ground gaps, post layout, and gate swing before installation.

It can be an option, depending on the dog and the design. Wire opening size, fence height, bottom clearance, gate gaps, and climbing or digging behavior all affect suitability. We discuss those needs rather than promising any fence is escape-proof.

Yes. Walk gates and suitable wider or double-gate layouts can be coordinated with the fence. We plan the opening, frame, support posts, swing clearance, hinges, and latch for the intended access.

We can review a customer-selected kit when it can be sourced and is suitable for the project. Please share the product information before purchasing so we can check dimensions, required components, mounting details, and installation requirements.

The measured length, height, material, fence design, gates, access, demolition, and site conditions determine the scope. Custom trim and difficult terrain also affect the work. Contact us for a written estimate for your property rather than relying on a generic price range.

Share the project address, photos, approximate length if known, preferred material, and any gate or pet needs. Tell us about boundary concerns, HOA requirements, access restrictions, irrigation, and known underground services. We confirm the measurements and site details during assessment.

We are a local, owner-operated business with more than 15 years of hands-on construction experience. We build both standard and custom designs, explain practical material choices, and define the work in a written scope. The project photos and video on this page show examples of our work.

Fence builder serving Tacoma and nearby communities

Harbor Deck & Fence installs and repairs fences for homeowners in Tacoma, University Place, Lakewood, Gig Harbor, Puyallup, and nearby Pierce County communities. We also work on projects in Kitsap County. Contact us with your property address to confirm service and discuss the project.

You can contact our team or browse our outdoor construction services if your plans include more than fencing.

Get a free fence estimate

Tell us what you want the fence to do and the look you have in mind. We’ll help you compare standard construction, custom details, repair, and replacement options for your property.